Whether it’s kids, dogs or an ambitious houseplant escapee, muddy prints happen. But before you resign yourself to living with “earth-tone décor,” Koh’s Universal Cleaner has your back — and your floors. From rugs to tiles, it lifts mud without leaving residue, so you can get back to clean, calm surfaces in minutes.
What you need
✔ Universal Cleaner – cuts through dirt, mud and grime
✔ Atomiser – for even spray control
✔ General Cloth – for blotting and wiping carpet or rugs
✔ Spray Mop – for hard floors and tiles
✔ Warm (not hot) water – for rinsing if needed
Step-by-step guide (Carpet & rugs)
Step 1
Let wet mud dry first — trying to clean it while wet just spreads it.
Step 2
Once dry, vacuum or brush away any loose dirt.
Step 3
Spray Universal Cleaner lightly over the remaining marks.
Step 4
Blot (don’t rub) with your General Cloth to lift dirt from the fibres.
Step 5
Repeat if needed, then blot with a clean, damp section of the cloth to finish.
Step-by-step guide (Hard floors: tiles, vinyl, timber)
Step 1
Fill your Spray Mop with Universal Cleaner.
Step 2
Lightly mist the muddy area and glide your mop across the surface.
Step 3
For stubborn spots, let the cleaner sit for 1–2 minutes before mopping again.
Step 4
Step back and admire your mud-free floors.
Pro tip
• Let mud dry before tackling it — patience pays off.
• Always blot carpet stains; rubbing can damage fibres.
• Wipe pet paws at the door next time — future you will thank you.
Safety note: Always test on a small area of carpet first. Avoid soaking fabric surfaces — too much water can damage backing.
